AGFA Drystar 5300 Reference Manual page 60

Each time the settings have been changed and confirmed, an automatic backup of
the old configuration is made on the internal CF-card. You will also be asked to
create a backup on an external CF-card.
After selecting YES, the 'Update backup on CF-card' screen is displayed:
Update backup on
CF-card
YES (v)
If you want to save the configuration on the backup CF-card, press the Confirm key
(YES). The printer will now enter the
If you only want to save the configuration on the internal CF-card, press the Escape
key (NO).
Next, the following screen is displayed (when necessary):
New settings will
be active after
reset
Press the Confirm key to reset the printer. After the reset, the new settings will be
active.
60
CS
NO (x)
CS
'Save configuration procedure' (see page 95).
2920B EN 20031206