Clearing Of Film Jams - AGFA Drystar 5300 Reference Manual

Clearing of film jams

A film jam can be situated either:
•
In the input tray section. Refer to
•
In the top section. Refer to
page 179.
Jams can be caused by:
•
Loading individual films incorrectly. Refer to
page 182.
•
Opening the top cover or input tray while a film is actually being printed. Refer to
'Unauthorized opening of the printer'
Overview of sections:
Film feed jams (clearing
from the input tray)
2920B EN 20031206
'Film input tray jams'
'Film transport jams (clearing from the top)'
'Film identification problems'
on page 181.
on page 176.
Film transport jams
(clearing from the
top section)
on
on
175