Saving The Configuration - AGFA Drystar 5300 Reference Manual

Saving the configuration

You need to complete this step, otherwise all the install data you have
entered will be lost!
A screen will ask you to insert the backup CF-card:
Save
configuration
Pls. Insert CF-card
1
Insert the CF-card.
" Refer to
'Inserting a CF-card'
As soon as the CF-card is inserted, the 'Copy' screen is displayed.
Copying
C:/<path><filename>
to
A:/<path><filename>
The printer saves the configuration on the CF-card.
When the writing process has finished, the following screen is displayed:
Save_config
finished
Pls. remove CF-card
2
Remove the CF-card.
" Refer to
'Removing a CF-card'
As soon as the CF-card is removed, the following screen is displayed:
Label card with:
'Backup card'
'Serial no: XXXX'
'Date and time:
yyyy-mmm-dd hh:mm:ss
3
Press the Confirm key.
2920B EN 20031206
IN
on page 21.
IN
IN
IN
on page 22.
137