Transport After Installation - AGFA Drystar 5300 Reference Manual

Transport after installation

The Drystar 5300 is quite compact, so moving the printer over a short
distance - if required - can be done in a convenient way.
" Refer to
'Safety precautions'
Always keep in mind the following safety guidelines:
•
The Drystar 5300 should always be transported by two persons,
•
Never lift the Drystar 5300 by the output tray,
•
Make sure the Drystar 5300 is placed on a stable, hard surface table.
1
Switch off the Drystar 5300 (refer to
page 30).
2
Disconnect the cables.
3
Move the Drystar 5300 to its destination (2 persons!).
4
Reconnect the cables.
5
Switch Drystar 5300 on (refer to
2920B EN 20031206
on page 8.
'Switching off the Drystar 5300'
'Switching on the Drystar 5300'
on
on page 28).
159