Changing The Date And Time - AGFA Drystar 5300 Reference Manual

Changing the general settings

Changing the date and time

1
Perform steps 1 to 2 of the
on page 59.
2
On the 'Change settings' screen, press the Confirm key to select 'General'.
The 'General' screen is displayed:
1 Date & time
2 Language
3 Beep on empty
(site specific data
via browser only)
3
Press the Confirm key to select 'Date & time'.
The 'Date' screen is displayed:
Date:
21- Aug -2003
dd-mmm-yyyy
4
Press the up/down arrow keys to increment/decrement the numbers or the
month. Press the left/right arrow keys to move through the digits.
" For more info, refer to
5
Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The 'Time' screen is displayed:
Time:
11: 48 :50
hh:mm:ss
6
Press the up/down arrow keys to increment/decrement the numbers. Press
the left/right arrow keys to move through the digits.
" For more info, refer to
7
Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
2920B EN 20031206
'Accessing the Change settings menu'
CS
CS
'Data entry'
CS
'Data entry'
on page 27.
on page 27.
procedure
61