Print head cleaning
Print head cleaning must be done when image quality problems occur.
To clean the print head:
1
Perform steps 1 to 2 of the
page
103
to select the 'Calibration' screen.
2
On the Print image menu, press the Down key, followed by the Confirm key to
select 'TPH cleaning'.
The printer will automatically shut down:
THERMAL HEAD
CLEANING
Shutdown in progress
3
The 'Thermal head cleaning' screen will give instructions on what to do:
THERMAL HEAD
CLEANING
1 Open top cover
2 Clean thermal head
3 Close top cover
4
Clean the print head resistor line. For more details, refer to
head resistor line'
5
After you have cleaned the print head resistor line and you have closed the
door, the printer will continue.
2920B EN 20031206
'Accessing the Calibration menu'
CA
62%
CA
on page 164.
procedure on
'Cleaning the print
107