Changing The Beep On Empty Tray Settings - AGFA Drystar 5300 Reference Manual

Changing the beep on empty tray settings

You can change the way the Drystar 5300 warns the user of an empty input
tray situation.
1
Perform steps 1 to 2 of the
on page 59 to select the 'General' screen.
2
On the 'Change settings' screen, press the Confirm key to select 'General'.
The 'General' screen is displayed:
1 Date & time
2 Language
3 Beep on empty
(site specific data
via browser only)
3
On the 'General' screen, press the Down key twice, followed by the Confirm
key to select 'Beep on empty'.
The 'Beep on empty tray' screen is displayed:
Beep on empty tray
No
* 5 times
many
" 'No' means that the printer will produce no audible signal when the input
tray is empty.
" '5 times' mains that the printer will sound 5 beeps when the input tray is
empty.
" 'many' means that the printer will continue to beep as long as the input
tray is empty.
The currently active setting is marked with a '*'.
4
Press the up/down arrow keys to select the desired setting.
5
Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
2920B EN 20031206
'Accessing the Change settings menu'
CS
CS
procedure
63