Removing A Modality - AGFA Drystar 4500 Reference Manual

D 4500 R
RYSTAR EFERENCE MANUAL

Removing a modality

Perform steps 1 to 2 of the
1
page 57.
On the 'Change setting' screen, press the Down key three times, followed by the
2
Confirm key to select 'Network-Dicom'.
The 'Network-Dicom' screen is displayed:
7 Remove modality
8 Add modality
On the 'Network-Dicom' screen, press the Down key six times, followed by the
3
Confirm key to select 'Remove modality'.
The 'Remove modality' screen is displayed:
1 <Modality name>
2 <Modality name>
3 <Modality name>
4 <Modality name>
The modality names, entered during installation of the printer, are shown in the list. If
no names have been entered, the Called AE-titles are shown instead.
Select the modality which you wish to remove by means of the arrow keys.
4
Press the Confirm key to remove the modality name from the list, or the Escape
5
key to quit the procedure without any changes.
80
Advanced operation (key-operator mode)
'Accessing the Change settings menu' procedure on
2800E EN 20050215