AGFA Drystar 5300 Reference Manual page 184

4
Press the Confirm key again to resume printing using a limited Maximum
Density.
Error messages related to the Film Identification tag on the film
pack
The following two error messages are related to the loading of film packs.
Invalid content of Film Identification tag
When you insert a new film pack with invalid content in the Film Identification
tag, the following message is displayed:
Invalid content
in identification code.
Please call Service
Code Exxxxx
Try loading another film pack, or call your local service organization to resolve
this problem.
Film overrun from current pack
The following message is presented when more than 110 copies are printed
from the current film pack:
Film overrun: More
then allowed films
printed from this
pack.
Please insert other
film pack
Reload a new film pack to resolve this problem.
184
2920B EN 20031206