Changing The Language - AGFA Drystar 5300 Reference Manual

Changing the language

1
Perform steps 1 to 2 of the
on page 59
2
On the 'Change settings' screen, press the Confirm key to select 'General'.
The 'General' screen is displayed:
1 Date & time
2 Language
3 Beep on empty
(site specific data
via browser only)
3
On the 'General' screen, press the Down key, followed by the Confirm key to
select 'Language'.
The 'Language' screen is displayed with the available languages (only the Western
languages are shown in this manual; contact Agfa for the latest Drystar 5300
language availability status):
1* English
2 Français
3 Deutsch
4 Nederlands
5 Dansk
6 Suomi
7 Svenska
8 Norsk
9 Italiano
10 Português
11 Español
etc..
The currently active language is marked with a '*'.
4
Press the up/down arrow keys to select the desired language.
5
Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
62
'Accessing the Change settings menu'
to select the 'General' screen.
CS
CS
procedure
2920B EN 20031206