Changing The Router Ip Address - AGFA Drystar 5300 Reference Manual

Changing the router IP address

1
Perform steps 1 to 2 of the
on page 59.
2
On the Change settings menu, press the Down key twice, followed by the
Confirm key to select 'Network (DICOM)'.
The 'Network (DICOM)' screen is displayed:
1 Printer AE_Title
2 Hostname
3 Domain name
4 Printer IP address
5 Serv. Host IP add.
6 Netmask
7 Router IP address
8 Remove modality
9 Add modality
10 Alert mailing
3
On the 'Network (DICOM)' screen, press the Down key six times, followed by
the Confirm key to select 'Router IP address'.
The 'Router IP address' screen is displayed:
Router IP address
123.123.123.123
(255.255.255.255)
If the router IP address has already been assigned, it will be shown on the display.
4
Enter the router IP address by means of the arrow keys. Refer to
on page 27.
" Note that blank spaces will be ignored (see examples on next page).
2920B EN 20031206
'Accessing the Change settings menu'
CS
CS
procedure
'Data entry'
77