When the Drystar 5300 is printing or calculating and the input
tray is empty:
1
The display shows the following message:
Empty input tray
Do not open tray yet
Get new film pack
2
Wait while the printer finishes printing any current jobs.
When the film path is cleared,
When the Drystar 5300 is in the ready state and the input tray is
empty:
3
The display shows the following message:
Empty input tray
OK to open the
input tray
4
Open the input tray.
To avoid possible film jams, make sure to open input tray all the way.
2920B EN 20031206
Flashing
Flashing
proceed with step 3.
Flashing
Flashing
37