AGFA Drystar 5300 Reference Manual page 176

Film input tray jams
A film jam in the input tray can occur when the Drystar 5300 is opened while a
film is currently printed, or when an individual film is incorrectly inserted in the
input tray. Refer also to
To remove a jammed film in the input tray:
1
Switch off the printer. Refer to
2
Open the film input tray.
If a film is jammed, gently remove the sheet. Reposition the film stack in the film
tray, making sure that all the sheets are kept correctly in place under the film
retainers (refer to
" Never use force to clear the jammed film. If it is not possible to gently
remove the jammed film, call your local service organization.
176
'Film identification problems'
'Switching off the Drystar 5300'
'Loading films' on page 36).
on page 182.
on page 30.
2920B EN 20031206