The status indicator LED
On the right side of the display, an LED indicates the status of the
Drystar 5300.
Color / Light
Constant
Green
Blinking
Blinking
Red
Constant
The control buttons
One control button has been provided:
Power/Reset
button
Do NOT press the Power/Reset button without first following the
procedure to stop printing when the Drystar 5300 is printing a film. Refer
to
'Switching off the Drystar 5300'
2920B EN 20031206
Status
Ready (stand-by)
Busy or in key-
operator mode
Warning status
Error status
• To power on or off the printer.
• To reset the printer.
Action
Proceed
Wait
Check the display for messages.
Refer to
'Checking the status
indicator LED'
on page 30.
on page 171.
19