AGFA Drystar 5300 Reference Manual page 124

The 'Select dataset' screen is displayed:
Select dataset
Dataset xyz v1.00
Dataset abc v1.00
Dataset def v1.00
etc...
8
Press the up/down arrow keys to select the desired save set file, followed by
the Confirm key.
The following confirmation screen is displayed:
Installation
from CF-card
<Dataset def v1.00>
YES (v)
9
Press the Confirm key (YES) to proceed with the selected file, or the Escape
key (NO) to quit the procedure without any changes.
The printer restores the configuration from the external CF-card:
Copying
A:/<path><filename>
to
C:/<path><filename>
When the copying of the save set is finished, the printer will ask you to remove the
CF-card:
Installation
finished
Please remove card
10
Remove the CF card.
" Refer to
As soon as the CF-card has been removed, the following screen is displayed (when
necessary):
New settings will
be active after
reset
11
Press the Confirm key to reset the printer. After the reset, the new settings
will be active.
This is the end of the procedure.
124
IN
IN
NO (x)
IN
IN
'Removing a CF-card'
IN
on page 22.
2920B EN 20031206