AGFA Drystar 5300 Reference Manual page 100

Restoring the previous configuration from the internal CF-card
1
Perform steps 1 to 3 of the
procedure on page
2
Press Down key, followed by the Confirm key to select 'Internal'.
The following confirmation screen is displayed:
Restore
from CF-card
<Dataset def v1.00>
YES (v)
3
Press the Confirm key (YES) to proceed with the selected file, or the Escape
key (NO) to quit the procedure without any changes.
The printer restores the previous configuration from the internal CF-card:
Copying
A:/<path><filename>
to
C:/<path><filename>
When the copying of the save set is finished, the following screen is displayed
(when necessary):
New settings will
be active after
reset
Press the Confirm key to reset the printer. After the reset, the new settings will be
active.
100
97 to select the 'Restore from CF-card' screen.
RC
NO (x)
RC
RC
'Accessing the restore configuration menu'
2920B EN 20031206