AGFA Drystar 5300 Reference Manual page 128

The 'Printer installation wizard' screen will appear:
Installation
wizard will guide
you through the
procedure
9
Press the Confirm key to continue.
The 'Generation/Preset of parameters' screen is displayed:
Generation/Preset
of parameters
Automatic
Manual
•
When you select 'Automatic', the Drystar 5300 will try to initialize all parameters
automatically and use them as default values in the following screens. This can
save much time.
•
When you select 'Manual', you will have to enter all values manually, unless
factory settings are available.
10
Use the arrow keys to select the desired generation method and press the
Confirm key to continue.
A screen with information on the sequence of the steps will appear:
Installation
wizard is divided
into 3 steps:
1 Printer network
settings
2 Host specific
settings
3 Save configuration
11
Press the Confirm key to start with step 1 or press the Escape key to quit the
procedure.
128
IN
IN
IN
2920B EN 20031206