AGFA Drystar 5300 Reference Manual page 103

Accessing the Calibration menu
1
Press the Key-operator key to enter the key-operator mode.
2
On the key-operator main menu, press the Down key five times followed by
the Confirm key to select 'Calibration'.
The 'Calibration' menu is displayed:
1 Film calibration
2 Therm. Head clean.
" This menu is the starting point for calibrations (see below).
3
Press the Escape key to return to the key-operator main menu.
4
Press the Escape key to quit the key-operator mode.
2920B EN 20031206
CA
103