AGFA Drystar 5300 Reference Manual page 131

The 'Netmask' screen is displayed:
Netmask
255.255.255.
(255.255.255.255)
If the netmask has already been assigned, it will be shown on the display.
7
Enter the netmask by means of the arrow keys. Refer to
page 27.
" Note that blank spaces will be ignored (see example).
Example: if the netmask is 255.255.255.0, then the data entry should be as follows:
Netmask
255.255.255.
(255.255.255.255)
8
Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The 'Router IP address' screen is displayed:
Router IP address
123.123.123.123
(255.255.255.255)
If the Router IP address has already been assigned, it will be shown on the display.
9
Enter the Router IP address by means of the arrow keys. Refer to
on page 27.
" Note that blank spaces will be ignored (see examples on next page).
Example 1: if the IP address is 123.001.123.123, then the data entry should be as
follows:
Router IP address:
123.001.123.123
(255.255.255.255)
Example 2: if the IP address is 123.1.123.123, then the data entry should be as
follows:
Router IP address:
123. 1.123.123
(255.255.255.255)
2920B EN 20031206
IN
0
IN
0
IN
IN
IN
'Data entry' on
'Data entry'
131