AGFA Drystar 5300 Reference Manual page 92

Printing test images
Test images are useful for checking the print quality. The Drystar 5300 offers
a number of built-in test images stored on the internal CF-card.
1
Perform steps 1 to 2 of the
page 91 to select the 'Print image' screen.
2
On the 'Print image' menu, press the Confirm key to select 'Test image'.
The 'Select test image' screen is displayed:
Select test image
1 SMPTE_KAN V2
2 SMPTE_LIN V2
3 TPA V1.tif
4 SMPTE_3.00 V2
3
Press the up/down arrow keys to select the desired test image, followed by
the Confirm key.
The 'Number of copies' screen is displayed:
Number of copies
01
4
Press the arrow keys to increment/decrement the number. For more info,
refer to 'Data entry'
5
Press the Confirm key to confirm the number of copies.
The 'Queuing file' screen will be shown to indicate to the operator that the printing
action is accepted and in process:
Queuing file
< filename>
Please wait
After about five seconds this screen will disappear.
" If the printer memory is full, the following message will appear:
Unable to accept
new job while
printing
Please wait
Wait until one or more print jobs have finished before launching a new one.
92
'Accessing the print images menu'
PI
PI
on page 27.
PI
PI
procedure on
2920B EN 20031206