AGFA Drystar 5300 Reference Manual page 98

Restoring printer settings from an external CF-card
1
Perform steps 1 to 3 of the
procedure on page
2
Press the Confirm key to select 'External'.
The 'Restore configuration' screen is displayed:
Restore
configuration
1 General
2 Network only
•
If you want to restore only the network parameters (e.g. for mobile installations),
press the Down key, followed by the Confirm key to select 'Network only'.
•
If you want to restore the complete configuration, press the Confirm key to select
'General'.
In both cases, the printer will ask you to insert a CF-card:
Restore
Configuration
Please insert card
3
Insert a CF-card.
" Refer to
In case a wrong CF-card has been inserted, the following message is displayed:
Restore
from CF-card
Wrong card inserted
4
If there are multiple save set files present on the CF-card, a list is shown.
The 'Select dataset' screen is displayed:
Select dataset
Dataset xyz v1.00
Dataset abc v1.00
Dataset def v1.00
etc...
98
97 to select the 'Restore from CF-card' screen.
RC
RC
'Inserting a CF-card'
RC
RC
'Accessing the restore configuration menu'
on page 21.
2920B EN 20031206