AGFA Drystar 5300 Reference Manual page 200

Drystar 5300 Imager: Determination of Operating Levels
Imager Type: __________
Film Type: ____________
Densitometer (Internal or External )
If External: Type ____________
Step 1: Print QC Test images on five consecutive days. Record the optical densities
measurements in the tables below. After five days, average the values to determine
the operating (aim) levels for each of the parameters.
Month
Day
Initials
Base + Fog
Mid Density
Dens. Difference
Average of 5 Values = operating (aim) level Density Difference
Dmax
Step 2: Copy the operating (aim) levels to Charts 2A/B ('Daily Density Control Chart')
200
Serial #: _________________
Emulsion #: ______________
Serial #: _________________
Day 1
Average of 5 Values = operating (aim) level Base + Fog
Average of 5 Values = operating (aim) level "Mid Density"
Average of 5 Values = operating (aim) level Dmax
Day 2 Day 3
Chart 1
Date ____________________
Day 4 Day 5
2920B EN 20031206