AGFA Drystar 5300 Reference Manual page 129

Entering the printer network settings
Some instruction screens will show the information you need to complete this
part of the installation:
Installation
wizard
Step 1: Printer
Network settings
1
Press the Confirm key to continue.
Information
concerning:
-Printer IP-address
-Service Host IP-addr
-Netmask
in case of subnets
-Router IP address
in case of subnets
-Printer AE_Title
----------------------------
ask network manager
for this info or use
automatic setting
2
Press the Confirm key to continue.
The 'Printer IP address' screen is displayed:
Printer IP addr.:
123.123.123.123
(255.255.255.255)
If the IP address has already been assigned, it will be shown on the display.
3
Press the up/down arrow keys to increment/decrement the numbers. Press
the left/right arrow keys to move through the fields. Press the Confirm key to
store the data.
" Refer to
'Data entry'
" Note that blank spaces will be ignored (see examples below).
Example 1: if the IP address is 123.001.123.123, then the data entry should be as
follows:
Printer IP addr.:
123.001.123.123
(255.255.255.255)
2920B EN 20031206
IN
IN
IN
on page 27.
IN
129