Changing The Hostname - AGFA Drystar 5300 Reference Manual

Changing the hostname

1
Perform steps 1 to 2 of the
on page 59.
2
On the Change settings menu, press the Down key twice, followed by the
Confirm key to select 'Network (DICOM)'.
The 'Network (DICOM)' screen is displayed:
1 Printer AE_Title
2 Hostname
3 Domain name
4 Printer IP address
5 Serv. Host IP add.
6 Netmask
7 Router IP address
8 Remove modality
9 Add modality
10 Alert mailing
3
In the 'Network (DICOM)' screen, press the Down key, followed by the
Confirm key to select 'Hostname'.
The 'Hostname' screen is displayed:
Hostname:
[Drystar
(max. 16 char)
If the Hostname has already been assigned, it will be shown on the display.
4
Change the hostname by means of the arrow keys. Refer to
page 27. Make sure not to enter more than 16 characters.
5
Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
70
'Accessing the Change settings menu'
CS
CS
]
procedure
'Data entry' on
2920B EN 20031206