Viewing Image Quality Information Of A Modality - AGFA Drystar 5300 Reference Manual

Viewing image quality information of a modality

1
Perform steps 1 and 2 of the
on page 49.
2
On the Show settings menu, press the Down key three times, followed by the
Confirm key to select 'Image quality'.
The following screen will appear:
1 General
2 Def. densitometer
3 Modality16charac
4 Modality16charac
5 etc...
3
Press the up/down arrow keys to select the desired modality.
4
Press the Confirm key to display the image quality settings for the selected
modality or the Escape key to quit.
Modality16char
Look Up Table:
Linear
Interpolation:
Cubic High Res
Smoothing: xxxx
Maximum density:
3.00
The image quality parameters for the selected modality are displayed. Refer to
'Changing Image quality settings for a modality'
those parameters.
5
Press the Confirm key to return to the Image quality menu.
6
In the Image quality menu, press the Escape key to return to the Show
settings menu.
2920B EN 20031206
'Accessing the Show settings menu'
SH
SH
on page 87 for more information on
procedure,
55