Changing The Hostname - AGFA Drystar 4500 Reference Manual

D 4500 R
RYSTAR EFERENCE MANUAL

Changing the Hostname

Perform steps 1 to 2 of the
1
page 57.
On the 'Change setting' screen, press the Down key three times, followed by the
2
Confirm key to select 'Network-Dicom'.
The 'Network-Dicom' screen is displayed:
7 Remove modality
8 Add modality
In the 'Network-Dicom' screen, press the Down key once, followed by the
3
Confirm key to select 'Hostname'.
The 'Hostname' screen is displayed:
Change the hostname by means of the arrow keys. Refer to
4
25. Make sure not to enter more than 16 characters.
Press the Confirm key to store the data, or the Escape key to quit the procedure
5
without any changes.
72
Advanced operation (key-operator mode)
'Accessing the Change settings menu' procedure on
e.g. DS4500
'Data entry'
2800E EN 20050215
on page