Changing The Hostname - AGFA Drystar 5302 Reference Manual

Changing the hostname

Perform steps 1 to 2 of the
1
page 68.
On the Change settings menu, press the Down key three times, followed by the
2
Confirm key to select 'Network (DICOM)'.
The 'Network (DICOM)' screen is displayed:
5 Netmask
6 Router IP-address
7 Remove modality
8 Add modality
In the 'Network (DICOM)' screen, press the Down key, followed by the Confirm
3
key to select 'Hostname'.
The 'Hostname' screen is displayed:
If the Hostname has already been assigned, it will be shown on the display.
Change the hostname by means of the arrow keys. Refer to
4
page 31. The hostname is limited to 16 characters.
Press the Confirm key to store the data, or the Escape key to quit the procedure
5
without any changes.
2830A EN 20050526
'Accessing the Change settings menu'
D 5302 R
RYSTAR EFERENCE MANUAL
procedure on
'Data entry' on
Advanced operation (Key-operator mode)
79