Changing The Beep On Empty Tray Settings - AGFA Drystar 4500 Reference Manual

Changing the beep on empty tray settings

Perform steps 1 to 2 of the
1
page 57 to select the 'General' screen.
On the 'Change setting' screen, press the Confirm key to select 'General'.
2
The 'General' screen is displayed:
On the 'General' screen, press the Down key twice, followed by the Confirm key
3
to select 'Beep on empty tray'.
The 'Audible alarm on empty tray' screen is displayed:
No alarm
5 times
While tray is empty
Select 'No alarm' if you do not want an audible signal to warn you that a tray is
4
empty. Select 5 times to hear 5 consecutive beeps at the moment a tray gets
empty. Select 'While tray is empty' to hear a beep the whole time a tray is empty.
Press the Confirm key to store the data, or the Escape key to quit the procedure
5
without any changes.
2800E EN 20050215
'Accessing the Change settings menu'
D 4500 R
RYSTAR EFERENCE MANUAL
procedure on
Advanced operation (key-operator mode)
61