Changing The Input Tray Settings (Upper / Lower) - AGFA DRY 3.4 Reference Manual

Changing the input tray settings (upper / lower)

Changing the film view
1. In the 'Upper input tray' screen, press the Down key twice, followed by the
Confirm key to select 'Film view'.
The 'Film view' screen is displayed:
The current film view is indicated with an *.
2. Press the Up/Down arrow keys to select the desired film view.
3. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Accessing the Change settings menu
DRY 3.4 | Advanced Operation (key-operator mode) | 29
Note: In the procedure, we will assume that the film view for the
upper input tray is to be changed. The procedure for the lower
input tray is identical.
on page 23
2604A EN 20180322 1454