D
5302 R
RYSTAR
EFERENCE MANUAL
Changing the general settings
Changing the date and time
Perform steps 1 to 2 of the
1
page 68.
On the Change settings menu, press the Confirm key to select 'General'.
2
The 'General' screen is displayed:
Press the Confirm key to select 'Date & time'.
3
The 'Date' screen is displayed:
Press the up/down arrow keys to increment/decrement the numbers or the
4
month. Press the left/right arrow keys to move through the digits.
For more info, refer to
Press the Confirm key to store the data, or the Escape key to quit the procedure
5
without any changes.
If you have pressed the Confirm key, the 'Time' screen is displayed:
Press the up/down arrow keys to increment/decrement the numbers. Press the
6
left/right arrow keys to move through the digits.
For more info, refer to
Press the Confirm key to store the data, or the Escape key to quit the procedure
7
without any changes.
70
Advanced operation (Key-operator mode)
'Accessing the Change settings menu'
'Data entry'
on page 31.
'Data entry'
on page 31.
procedure on
2830A EN 20050526