Changing The Date And Time - AGFA Drystar 5500 Reference Manual

D 5500/5503 R
RYSTAR EFERENCE MANUAL
Changing the General settings

Changing the date and time

Perform steps 1 to 2 of the
1
page 70.
On the 'Change setting' screen, press the Confirm key to select 'General'.
2
The 'General' screen is displayed:
Press the Confirm key to select 'Date and time'.
3
The 'Date and time' screen is displayed:
Press the Up/Down arrow keys to increment/decrement the numbers. Press the
4
Left/Right arrow keys to move through the digits.
For more info, refer to
Press the Confirm key to store the data, or the Escape key to quit the procedure
5
without any changes.
72
Advanced operation (Key-operator mode)
'Accessing the Change settings menu'
'Data entry' on page 33.
procedure on
2900H EN 20071108