Transport After Installation - AGFA Drystar 5500 User Manual

Transport after installation

Before moving the printer, always switch off the machine. The user has to be
very cautious concerning stability, when moving the printer. When doing this,
he has to take into account the condition and the structure of the subsoil,
obstructions and slopes. Also the user has to make sure that the brakes are
loose. The appliance can only be transported with all covers closed. The
appliance may not be transported continuously from one location to the other.
WARNING:
To prevent injuries, lock the brakes when the printer is in place
at the right location.
Drystar 5500, Drystar 5503 | Introduction | 29
2901J EN 20191018 0826