Multiple Port Monitoring And Configuration Support - Avaya 8800 User Interface Fundamentals

Enterprise Device Manager procedures

Multiple port monitoring and configuration support

When you want to monitor or apply the same configuration changes to more than one port,
you can use the Multiple Port Selection function. You can use the standard menus and the
shortcut menus with Multiple Port selection. If you use the embedded EDM, you can select up
to a maximum of 24 ports. There is no port limitation for COM users.
On the Device Physical View, using a standard mouse, you can either
• Ctrl+click to select up to 24 specific ports (for the embedded EDM)
• click and drag to select up to 24 adjacent ports (for the embedded EDM)
If you use click and drag, ensure that you click just outside the first port in the group and drag
the mouse pointer over the group. Selected ports for both methods appear within a yellow
outline on the Device Physical View.
Using Multiple Port Selection and the shortcut menu
Use the following procedure to use the port shortcut menu to configure up to 24 ports at once
for the embedded EDM; there is no limitation for COM.
Procedure steps
In the Device Physical View, do one of the following if you are using a standard
mouse.
68 User Interface Fundamentals
a. To select several ports, point your mouse to each port and use Ctrl+Click
to select up to 24 ports.
The selected ports appear within a yellow outline on the Device Physical
View.
i. Right click your mouse to display the shortcut menu.
ii. Select an option from the shortcut menu.
b. To select a group of adjacent ports, point your mouse just outside the group
and drag the pointer over the group (embedded EDM is limited to selection
of a maximum of 24 ports at once).
The selected ports appear within a yellow outline on the Device Physical
View.
Right click your mouse to display the shortcut menu.
Comments? infodev@avaya.com
July 2013