User/Group Group Summary Screen - ZyXEL Communications USG40 User Manual

Table 282 Configuration > Object > User/Group > User > Add (continued)
LABEL
Lease Time
Reauthentication
Time
Configuration
Validation
OK
Cancel

42.2.3 User/Group Group Summary Screen

User groups consist of access users and other user groups. You cannot put admin users in user
groups. The Group screen provides a summary of all user groups. In addition, this screen allows
you to add, edit, and remove user groups. To access this screen, login to the Web Configurator, and
click Configuration > Object > User/Group > Group.
Figure 497 Configuration > Object > User/Group > Group
The following table describes the labels in this screen. See
information as well.
Table 283 Configuration > Object > User/Group > Group
LABEL
Add
Edit
Remove
Chapter 42 Object
DESCRIPTION
If you select Use Default Settings in the Authentication Timeout Settings field, the
default lease time is shown.
If you select Use Manual Settings, you need to enter the number of minutes this user
has to renew the current session before the user is logged out. You can specify 1 to
1440 minutes. You can enter 0 to make the number of minutes unlimited. Admin users
renew the session every time the main screen refreshes in the Web Configurator. Access
users can renew the session by clicking the Renew button on their screen. If you allow
access users to renew time automatically (see
can select this check box on their screen as well. In this case, the session is
automatically renewed before the lease time expires.
If you select Use Default Settings in the Authentication Timeout Settings field, the
default lease time is shown.
If you select Use Manual Settings, you need to type the number of minutes this user
can be logged into the ZyWALL/USG in one session before the user has to log in again.
You can specify 1 to 1440 minutes. You can enter 0 to make the number of minutes
unlimited. Unlike Lease Time, the user has no opportunity to renew the session
without logging out.
Use a user account from the group specified above to test if the configuration is correct.
Enter the account's user name in the User Name field and click Test.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so. Removing a group does not remove the user accounts in the
group.
ZyWALL/USG Series User's Guide
731
Section 42.2.4 on page
Section 42.2.3.1 on page 732
733), the users
for more