ZyXEL Communications USG40 User Manual page 730

Zywall/usg series
Hide thumbs Also See for USG40:
Table of Contents

Advertisement

Figure 496 Configuration > Object > User/Group > User > Add
The following table describes the labels in this screen.
Table 282 Configuration > Object > User/Group > User > Add
LABEL
DESCRIPTION
User Name
Type the user name for this user account. You may use 1-31 alphanumeric characters,
underscores(
case-sensitive. User names have to be different than user group names, and some
words are reserved. See
User Type
This field displays the types of user accounts the ZyWALL/USG uses:
Password
This field is not available if you select the ext-user or ext-group-user type.
Enter the password of this user account. It can consist of 4 - 31 alphanumeric
characters.
Retype
This field is not available if you select the ext-user or ext-group-user type.
Group Identifier
This field is available for a ext-group-user type user account.
Specify the value of the AD or LDAP server's Group Membership Attribute that
identifies the group to which this user belongs.
Associated AAA
This field is available for a ext-group-user type user account. Select the AAA server to
Server Object
use to authenticate this account's users.
Description
Enter the description of each user, if any. You can use up to 60 printable ASCII
characters. Default descriptions are provided.
Authentication
If you want the system to use default settings, select Use Default Settings. If you
Timeout Settings
want to set authentication timeout to a value other than the default settings, select Use
Manual Settings then fill your preferred values in the fields that follow.
Chapter 42 Object
), or dashes (-), but the first character cannot be a number. This value is
_
Section 42.2.2.2 on page
admin - this user can look at and change the configuration of the ZyWALL/USG
limited-admin - this user can look at the configuration of the ZyWALL/USG but not
to change it
user - this user has access to the ZyWALL/USG's services and can also browse user-
mode commands (CLI).
guest - this user has access to the
configuration.
ext-user - this user account is maintained in a remote server, such as RADIUS or
LDAP. See
Ext-User Accounts on page 726
ext-group-user - this user account is maintained in a remote server, such as
RADIUS or LDAP. See
Ext-Group-User Accounts on page 727
about this type.
ZyWALL/USG Series User's Guide
730
729.
ZyWALL/USG
's services but cannot look at the
for more information about this type.
for more information

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents