The Discount Screen - ZyXEL Communications USG40 User Manual

Table 171 Configuration > Hotspot > Billing > Billing Profile > Add/Edit (continued)
LABEL
Quota Type
Total Quota
Upload Quota
Download Quota
Enable
Bandwidth
Upload
Download
Priority
OK
Cancel

21.5 The Discount Screen

Use this screen to configure a custom discount pricing plan. This is useful for providing reduced
rates for purchases of longer periods of time. You can charge higher rates per unit at lower levels
(fewer units purchased) and lower rates per unit at higher levels (more units purchased). Click
Configuration > Hotspot > Billing > Discount to open the following screen.
Note: The discount price plan does not apply to users who purchase access time online
with a credit card.
Chapter 21 Hotspot
DESCRIPTION
The quota settings section is NOT available when you set Accounting Method to Time to
Finish in the Billing > General screen.
Set a limit for the user accounts. This only applies to user's traffic that is received or
transmitted through the WAN interface.
Note: When the limit is exceeded, the user is not allowed to access the Internet through the
ZyWALL/USG.
Select Total to set a limit on the total traffic in both directions.
Select Upload/Download to set a limit on the upstream traffic and downstream traffic
respectively.
If you select Total, specify how much downstream and/or upstream data (in MB
(Megabytes) or GB (Gigabytes)) can be transmitted through the WAN interface before the
account expires. 0 means there is no data limit for the user account.
If you select Upload/Download, specify how much upstream data (in MB (Megabytes) or
GB (Gigabytes)) can be transmitted through the WAN interface before the account expires.
0 means there is no data limit for the user account.
If you select Upload/Download, specify how much downstream data (in MB (Megabytes)
or GB (Gigabytes)) can be transmitted through the WAN interface before the account
expires.
0 means there is no data limit for the user account.
Select this option to turn on bandwidth management for the user accounts.
Specify the maximum outgoing bandwidth allowed for the user account in kilobits per
second. Upload refers to the traffic the ZyWALL/USG sends out from a user.
Specify the maximum incoming bandwidth allowed for the user account in kilobits per
second. Download refers to the traffic the ZyWALL/USG sends to a user.
Enter a number between 1 and 7 to set the priority for the user's traffic. The smaller the
number, the higher the priority.
Traffic with a higher priority is given bandwidth before traffic with a lower priority.
Note: The priority setting here has priority over the priority setting in a bandwidth
management rule.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving.
ZyWALL/USG Series User's Guide
473