Secured Service Status Screen - ZyXEL Communications USG40 User Manual

Table 34 Dashboard > Interface Status Summary
LABEL
HA Status
Zone
IP Addr/Netmask
IP Assignment
Action

6.2.12 Secured Service Status Screen

This part shows what Unified Threat Management (UTM) services are available and enabled.
Figure 147 Dashboard > Secured Service Status
This table describes the fields in the above screen.
Table 35 Dashboard > Secured Service Status
LABEL
#
Status
Name
Chapter 6 Dashboard
DESCRIPTION
This field displays the status of the interface in the virtual router.
Active - This interface is the master interface in the virtual router.
Stand-By - This interface is a backup interface in the virtual router.
Fault - This VRRP group is not functioning in the virtual router right now. For
example, this might happen if the interface is down.
n/a - Device HA is not active on the interface.
This field displays the zone to which the interface is currently assigned.
This field displays the current IP address and subnet mask assigned to the
interface. If the IP address is 0.0.0.0/0.0.0.0, the interface is disabled or did not
receive an IP address and subnet mask via DHCP.
If this interface is a member of an active virtual router, this field displays the IP
address it is currently using. This is either the static IP address of the interface
(if it is the master) or the management IP address (if it is a backup).
This field displays the interface's IP assignment. It will show DHCP or Static.
Use this field to get or to update the IP address for the interface.
Click Renew to send a new DHCP request to a DHCP server.
Click the Connect icon to have the ZyWALL/USG try to connect a PPPoE/PPTP
interface. If the interface cannot use one of these ways to get or to update its IP
address, this field displays n/a.
Click the Disconnect icon to stop a PPPoE/PPTP connection.
DESCRIPTION
This field is a sequential value, and it is not associated with a specific status.
This field displays the status of the ZyWALL/USG's secure services. It will show
four types of status, Licensed or Unlicensed or Disabled or Enabled.
This field displays the name of the service, for example Anti-Spam.
ZyWALL/USG Series User's Guide
175