Isp And Wan And Isp Connection Settings - ZyXEL Communications USG40 User Manual

Figure 104 WAN Interface Setup: Step 2 Dynamic IP
Figure 105 WAN Interface Setup: Step 2 Fixed IP
• WAN Interface: This is the interface you are configuring for Internet access.
• Zone: This is the security zone to which this interface and Internet connection belong.
• IP Address Assignment: Select Auto If your ISP did not assign you a fixed IP address.
Select Static if you have a fixed IP address and enter the IP address, subnet mask, gateway IP
address (optional) and DNS server IP address(es).

5.2.4 ISP and WAN and ISP Connection Settings

Use this screen to configure the ISP and WAN interface settings. This screen is read-only if you
select Ethernet and set t the IP Address Assignment to AutoStatic. If you set the IP Address
Assignment to static and/or select PPTP or PPPoE, enter the Internet access information exactly
as your ISP gave it to you.
Note: Enter the Internet access information exactly as your ISP gave it to you.
Chapter 5 Quick Setup Wizards
ZyWALL/USG Series User's Guide
132