System Status Screen - ZyXEL Communications USG40 User Manual

Figure 136 Dashboard > Device Information (Example)
This tabel describes the fields in the above screen.
Table 24 Dashboard > Device Information
LABEL
Device Information
System Name
Model Name
Serial Number
MAC Address Range
Firmware Version

6.2.2 System Status Screen

Figure 137 Dashboard > System Status (Example)
Chapter 6 Dashboard
DESCRIPTION
This identifies a device installed in one of the ZyWALL/USG's extension slots, the
Security Extension Module slot, or USB ports. For an installed SEM (Security
Extension Module) card, this field displays what kind of SEM card is installed.
SEM-VPN - The VPN accelerator. The SEM-VPN provides 500 Mbps VPN
throughput, 2,000 IPSec VPN tunnels, and 750 SSL VPN users.
SEM-DUAL - accelerator for both VPN and UTM. The SEM-DUAL provides the
benefits of the SEM-VPN and increases the maximum anti-virus and IDP traffic
throughput from 100 Mbps to 400 Mbps.
This field displays the name used to identify the ZyWALL/USG on any network.
Click the link and open the Host Name screen where you can edit and make
changes to the system and domain name.
This field displays the model name of this ZyWALL/USG.
This field displays the serial number of this ZyWALL/USG. The serial number is
used for device tracking and control.
This field displays the MAC addresses used by the ZyWALL/USG. Each physical
port has one MAC address. The first MAC address is assigned to physical port 1,
the second MAC address is assigned to physical port 2, and so on.
This field displays the version number and date of the firmware the ZyWALL/USG
is currently running. Click the link to open the Firmware Package screen where
you can upload firmware.
ZyWALL/USG Series User's Guide
165