Configuring Www Service Control - ZyXEL Communications USG40 User Manual

43.7.4 Configuring WWW Service Control

Click Configuration > System > WWW to open the WWW screen. Use this screen to specify
from which zones you can access the ZyWALL/USG using HTTP or HTTPS. You can also specify
which IP addresses the access can come from.
Note: Admin Service Control deals with management access (to the Web Configurator).
User Service Control deals with user access to the ZyWALL/USG (logging into
SSL VPN for example).
Figure 583 Configuration > System > WWW > Service Control
The following table describes the labels in this screen.
Table 356 Configuration > System > WWW > Service Control
LABEL
HTTPS
Enable
Chapter 43 System
DESCRIPTION
Select the check box to allow or disallow the computer with the IP address that
matches the IP address(es) in the Service Control table to access the ZyWALL/USG
Web Configurator using secure HTTPs connections.
ZyWALL/USG Series User's Guide
841