ZyXEL Communications USG40 User Manual page 869

Figure 615 Configuration > System > Auth. Server
The following table describes the labels in this screen.
Table 365 Configuration > System > Auth. Server
LABEL DESCRIPTION
Enable Select the check box to have the ZyWALL/USG act as a RADIUS server.
Authentication
Server
Authentication Select the certificate whose corresponding private key is to be used to identify the
Server ZyWALL/USG to the RADIUS client. You must have certificates already configured in the My
Certificate Certificates screen.
Authentication Select an authentication method if you have created any in the Configuration > Object >
Method Auth. Method screen.
Trusted Client Use this section to configure trusted clients in the ZyWALL/USG RADIUS server database.
Add Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry.
Edit Double-click an entry or select it and click Edit to be able to modify the entry's settings.
Remove To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so. Note that subsequent entries move up by one when you take
this action.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
# This is the index number of the entry.
Status This icon is lit when the entry is active and dimmed when the entry is inactive.
Profile Name This field indicates the name assigned to the profile.
IP Address This is the IP address of the RADIUS client that is allowed to exchange messages with the
ZyWALL/USG.
Mask This is the subnet mask of the RADIUS client.
Description This is the description of the RADIUS client.
Apply Click Apply to save your changes back to the ZyWALL/USG.
Reset Click Reset to return the screen to its last-saved settings.
Chapter 43 System
ZyWALL/USG Series User's Guide
869