ZyXEL Communications USG40 User Manual page 216

Click Monitor > UTM Statistics > App Patrol to display the following screen. This screen displays
Application Patrol statistics based on the App Patrol profiles bound to Security Policy profiles.
Figure 179 Monitor > UTM Statistics > App Patrol
The following table describes the labels in this screen.
Table 70 Monitor > UTM Statistics > App Patrol
LABEL
Collect Statistics
Apply
Reset
Refresh
Flush Data
App Patrol Statistics
#
Application
Forwarded Data (KB)
Dropped Data (KB)
Rejected Data (KB)
Matched Auto
Connection
Inbound Kbps
Outbound Kbps
Chapter 7 Monitor
DESCRIPTION
Select this check box to have the ZyWALL/USG collect app patrol statistics.
The collection starting time displays after you click Apply. All of the statistics in
this screen are for the time period starting at the time displayed here. The
format is year, month, day and hour, minute, second. All of the statistics are
erased if you restart the ZyWALL/USG or click Flush Data. Collecting starts over
and a new collection start time displays.
Click Apply to save your changes back to the ZyWALL/USG.
Click Reset to return the screen to its last-saved settings.
Click this button to update the report display.
Click this button to discard all of the screen's statistics and update the report
display.
This field is a sequential value, and it is not associated with a specific App Patrol
session.
This is the protocol.
This is how much of the application's traffic the ZyWALL/USG has sent (in
kilobytes).
This is how much of the application's traffic the ZyWALL/USG has discarded
without notifying the client (in kilobytes). This traffic was dropped because it
matched an application policy set to "drop".
This is how much of the application's traffic the ZyWALL/USG has discarded and
notified the client that the traffic was rejected (in kilobytes). This traffic was
rejected because it matched an application policy set to "reject".
This is how much of the application's traffic the ZyWALL/USG identified by
examining the IP payload.
This field displays the amount of the application's traffic that has gone to the
ZyWALL (in kilo bits per second).
This field displays the amount of the application's traffic that has gone from the
ZyWALL (in kilo bits per second).
ZyWALL/USG Series User's Guide
216