Add/Edit Rogue/Friendly List - ZyXEL Communications USG40 User Manual

Each field is described in the following table.
Table 90 Configuration > Wireless > MON Mode
LABEL
General Settings
Enable Rogue AP
Containment
Rogue/Friendly AP List
Add
Edit
Remove
Containment
Dis-Containment
#
Containment
Role
MAC Address
Description
Rogue/Friendly AP List
Importing/Exporting
File Path / Browse /
Importing
Exporting
Apply
Reset

9.4.1 Add/Edit Rogue/Friendly List

Select an AP and click the Edit button in the Configuration > Wireless > MON Mode table to
display this screen.
Figure 206 Configuration > Wireless > MON Mode > Add/Edit Rogue/Friendly
Chapter 9 Wireless
DESCRIPTION
Select this to enable rogue AP containment.
Click this button to add an AP to the list and assign it either friendly or rogue
status.
Select an AP in the list to edit and reassign its status.
Select an AP in the list to remove.
Click this button to quarantine the selected AP.
A quarantined AP cannot grant access to any network services. Any stations that
attempt to connect to a quarantined AP are disconnected automatically.
Click this button to take the selected AP out of quarantine.
An unquarantined AP has normal access to the network.
This field is a sequential value, and it is not associated with any interface.
This field indicates the selected AP's containment status.
This field indicates whether the selected AP is a rogue-ap or a friendly-ap. To
change the AP's role, click the Edit button.
This field indicates the AP's radio MAC address.
This field displays the AP's description. You can modify this by clicking the Edit
button.
These controls allow you to export the current list of rogue and friendly APs or
import existing lists.
Enter the file name and path of the list you want to import or click the Browse
button to locate it. Once the File Path field has been populated, click Importing
to bring the list into the ZyWALL/USG.
Click this button to export the current list of either rogue APs or friendly APS.
Click Apply to save your changes back to the ZyWALL/USG.
Click Reset to return the screen to its last-saved settings.
ZyWALL/USG Series User's Guide
254