Configuring Active-Passive Mode Device Ha - ZyXEL Communications USG40 User Manual

Figure 488 Management IP Addresses

41.4.1 Configuring Active-Passive Mode Device HA

The Device HA Active-Passive Mode screen lets you configure general active-passive mode
Device HA settings, view and manage the list of monitored interfaces, and synchronize backup
ZyWALL/USGs. To access this screen, click Configuration > Device HA > Active-Passive Mode.
Figure 489 Configuration > Device HA > Active Passive Mode
Chapter 41 Device HA
A
192.168.1.1
192.168.1.5
B
192.168.1.1
192.168.1.6
ZyWALL/USG Series User's Guide
715