Adding/Editing An Advertisement Url - ZyXEL Communications USG40 User Manual

Table 192 Configuration > Hotspot > Advertisement (continued)
LABEL
Name
URL
Hotspot License
Status
License
Status
License Type
Expiration
Date
Apply
Reset

27.1.1 Adding/Editing an Advertisement URL

Click Configuration > Hotspot > Advertisement and then the Add (or Edit) icon in the
Advertisement Summary section to open the Add/Edit Advertisement URL screen. Use this
screen to configure an advertisement address entry.
Note: You can create up to 20 advertisement URL entries. The ZyWALL/USG randomly
picks one and open the specified web site in a new frame when an authenticated
user is attempts to access the Internet.
Figure 356 Configuration > Hotspot > Advertisement > Add/Edit
The following table gives an overview of the objects you can configure.
Table 193 Configuration > Hotspot > Advertisement > Add/Edit
LABEL
Name
URL
Preview
OK
Cancel
Chapter 27 Advertisement Screen
DESCRIPTION
This field displays the descriptive name of web site.
This field displays the address of web site.
This field displays whether the service is activated (Licensed) or not (Not Licensed).
This shows whether you have a trial or standard license or none (Trial, Standard, None).
This shows when your hotspot license will expire.
Click this button to save your changes to the ZyWALL/USG.
Click this button to return the screen to its last-saved settings.
DESCRIPTION
Enter a descriptive name for the advertisement web site.
You can use up to 31 alphanumeric characters (A-Z, a-z, 0-9) and underscores (_). Spaces
are not allowed. The first character must be a letter.
Enter the URL or IP address of the web site.
Use "http://" followed by up to 262 characters (0-9a-zA-Z;/?:@&=+$\.-_!~*'()%). For
example, http://www.example.com or http://172.16.1.35.
Click this button to open the specified web site in a new frame.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving.
ZyWALL/USG Series User's Guide
507