Domain/Ip Base Screen - ZyXEL Communications USG40 User Manual

Table 189 Configuration > Hotspot > Walled Garden: URL Base: Add/Edit (continued)
LABEL
URL
Preview
OK
Cancel

26.4 Domain/IP Base Screen

Use this screen to configure walled garden web site links, which use a (wildcard) domain name or
an IP address. These links will not display in the login page.
Click Configuration > Hotspot > Walled Garden and then select the Domain/IP Base tab to
display the screen.
Figure 352 Configuration > Hotspot > Walled Garden: Domain/IP Base
The following table describes the labels in this screen.
Table 190 Configuration > Hotspot > Walled Garden: Domain/IP Based
LABEL
Walled Garden
Domain/IP List
Add
Edit
Remove
Activate
Inactivate
#
Status
Name
Chapter 26 Walled Garden
DESCRIPTION
Enter the URL of the web site.
Use "http://" or "https://" followed by up to 262 characters (0-9a-zA-Z;/?:@&=+$\.-
_!~*'()%). For example, http://www.example.com or http://172.16.1.35.
Click this button to open the specified web site in a new frame.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving.
DESCRIPTION
Use this table to manage the list of walled garden web site links.
Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
This field is a sequential value, and it is not associated with any entry.
This icon is lit when the entry is active and dimmed when the entry is inactive.
This field displays the descriptive name of the web site.
ZyWALL/USG Series User's Guide
503