ZyXEL Communications USG40 User Manual page 808

The following table describes the labels in this screen.
Table 334 Configuration > Object > Certificate > Trusted Certificates > Edit
LABEL DESCRIPTION
Name This field displays the identifying name of this certificate. You can change the name.
You can use up to 31 alphanumeric and ;'~!@#$%^&()_+[]{}',.=- characters.
Certification Path Click the Refresh button to have this read-only text box display the end entity's
certificate and a list of certification authority certificates that shows the hierarchy of
certification authorities that validate the end entity's certificate. If the issuing
certification authority is one that you have imported as a trusted certificate, it may be
the only certification authority in the list (along with the end entity's own certificate).
The ZyWALL/USG does not trust the end entity's certificate and displays "Not trusted"
in this field if any certificate on the path has expired or been revoked.
Refresh Click Refresh to display the certification path.
Enable X.509v3 CRL Select this check box to turn on/off certificate revocation. When it is turned on, the
Distribution Points ZyWALL/USG validates a certificate by getting Certificate Revocation List (CRL) through
and OCSP checking HTTP or LDAP (can be configured after selecting the LDAP Server check box) and
online responder (can be configured after selecting the OCSP Server check box).
OCSP Server Select this check box if the directory server uses OCSP (Online Certificate Status
Protocol).
URL Type the protocol, IP address and path name of the OCSP server.
ID The ZyWALL/USG may need to authenticate itself in order to assess the OCSP server.
Type the login name (up to 31 ASCII characters) from the entity maintaining the server
(usually a certification authority).
Password Type the password (up to 31 ASCII characters) from the entity maintaining the OCSP
server (usually a certification authority).
LDAP Server Select this check box if the directory server uses LDAP (Lightweight Directory Access
Protocol). LDAP is a protocol over TCP that specifies how clients access directories of
certificates and lists of revoked certificates.
Address Type the IP address (in dotted decimal notation) of the directory server.
Port Use this field to specify the LDAP server port number. You must use the same server
port number that the directory server uses. 389 is the default server port number for
LDAP.
ID The ZyWALL/USG may need to authenticate itself in order to assess the CRL directory
server. Type the login name (up to 31 ASCII characters) from the entity maintaining
the server (usually a certification authority).
Password Type the password (up to 31 ASCII characters) from the entity maintaining the CRL
directory server (usually a certification authority).
Certificate These read-only fields display detailed information about the certificate.
Information
Type This field displays general information about the certificate. CA-signed means that a
Certification Authority signed the certificate. Self-signed means that the certificate's
owner signed the certificate (not a certification authority). X.509 means that this
certificate was created and signed according to the ITU-T X.509 recommendation that
defines the formats for public-key certificates.
Version This field displays the X.509 version number.
Serial Number This field displays the certificate's identification number given by the certification
authority.
Subject This field displays information that identifies the owner of the certificate, such as
Common Name (CN), Organizational Unit (OU), Organization (O) and Country (C).
Chapter 42 Object
ZyWALL/USG Series User's Guide
808