Adding/Editing A Walled Garden Url - ZyXEL Communications USG40 User Manual

Zywall/usg series
Hide thumbs Also See for USG40:
Table of Contents

Advertisement

Table 188 Configuration > Hotspot > Walled Garden: URL Based (continued)
LABEL
Remove
Activate
Inactivate
Move
#
Status
Display
Name
URL
Apply
Reset

26.3.1 Adding/Editing a Walled Garden URL

Go to the Configuration > Web Authentication > Walled Garden > URL Base screen. Click
Add or select an entry and click the Edit to open the Add/Edit Walled Garden URL screen. Use
this screen to configure a walled garden web site URL entry.
Figure 351 Configuration > Hotspot > Walled Garden: URL Base: Add/Edit
The following table describes the labels in this screen.
Table 189 Configuration > Hotspot > Walled Garden: URL Base: Add/Edit
LABEL
Enable
Hide in login
page
Name
Chapter 26 Walled Garden
DESCRIPTION
To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
To move an entry to a different number in the list, click the Move icon. In the field that
appears, specify the number to which you want to move the interface.
This field is a sequential value, and it is not associated with any entry.
This icon is lit when the entry is active and dimmed when the entry is inactive.
This icon is lit when the web site link is set to display in the user login screen.
This field displays the descriptive name of the web site.
This field displays the URL of the web site.
Click this button to save your changes to the ZyWALL/USG.
Click this button to return the screen to its last-saved settings.
DESCRIPTION
Select this to activate the entry.
Select this to not display the web site link in the user login screen.
This is helpful if a user's access to a specific web site is required to stay connected but he
or she doesn't need to visit that web site.
Enter a descriptive name for the walled garden link to be displayed in the login screen.
You can use up to 31 alphanumeric characters (A-Z, a-z, 0-9) and underscores (_). Spaces
are also allowed. The first character must be a letter.
ZyWALL/USG Series User's Guide
502

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents