ZyXEL Communications USG40 User Manual page 783

Table 321 Configuration > Object > Schedule > Schedule Group
LABEL
#
Name
Description
Members
Reference
42.8.3.1 The Schedule Group Add/Edit Screen
The Schedule Group Add/Edit screen allows you to define a schedule group or edit an existing
one. To access this screen, go to the Schedule screen (see ), and click either the Add icon or an
Edit icon in the Schedule Group section.
Figure 539 Configuration > Schedule > Schedule Group > Add
The following table describes the fields in the above screen.
Table 322 Configuration > Schedule > Schedule Group > Add
LABEL
Group Members
Name
Description
Chapter 42 Object
DESCRIPTION
This field is a sequential value, and it is not associated with a specific schedule.
This field displays the name of the schedule group, which is used to refer to the
schedule.
This field displays the decription of the schedule group.
This field lists the members in the schedule group. Each member is separated by
a comma.
This displays the number of times an object reference is used in a profile.
DESCRIPTION
Type the name used to refer to the recurring schedule. You may use 1-31
alphanumeric characters, underscores(
cannot be a number. This value is case-sensitive.
Enter a description of the service group, if any. You can use up to 60 printable
ASCII characters.
ZyWALL/USG Series User's Guide
783
), or dashes (-), but the first character
_