Ppp Interface Add Or Edit - ZyXEL Communications USG40 User Manual

Zywall/usg series

Hide thumbs Also See for USG40:

Table of Contents

Table 105 Configuration > Network > Interface > PPP (continued)

Object References

Base Interface

Account Profile

10.4.2 PPP Interface Add or Edit

Note: You have to set up an ISP account before you create a PPPoE/PPTP/

This screen lets you configure a PPPoE or PPTP or L2TP interface. If you enabled IPv6 in the

Configuration > System > IPv6 screen, you can also configure PPP interfaces used for your IPv6

networks on this screen. To access this screen, click the Add icon or an Edit icon in the PPP

Interface screen.

Chapter 10 Interfaces

To connect an interface, select it and click Connect. You might use this in testing the

interface or to manually establish the connection for a Dial-on-Demand PPPoE/PPTP

To disconnect an interface, select it and click Disconnect. You might use this in testing

the interface.

Select an entry and click Object Reference to open a screen that shows which

settings use the entry. See

This field is a sequential value, and it is not associated with any interface.

The activate (light bulb) icon is lit when the entry is active and dimmed when the entry

is inactive.

The connect icon is lit when the interface is connected and dimmed when it is

disconnected.

This field displays the name of the interface.

This field displays the interface on the top of which the PPPoE/PPTP/L2TP interface is.

This field displays the ISP account used by this PPPoE/PPTP interface.

Click Apply to save your changes back to the ZyWALL/USG.

Click Reset to return the screen to its last-saved settings.

ZyWALL/USG Series User's Guide

Section 10.3.4 on page 286

for an example.

Show Quick Links

Table of Contents